Filter By:
Parts & Accessories

$10.99
Product details
- Easily integrate your Bontrager Flare tail light on your Madone 9 Series
- Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter

$36.99
A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights.
Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach!
- Communicates via ANT+ wireless technology
- Compatible with all Bontrager RT front and rear bike lights
- Can be paired with up to four lights simultaneously
- Wirelessly controls light functions, including on/off and mode selection, and signals battery status
- Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately)
- Double-press powers on all lights; single press changes modes
- Flashing LED when powered on indicates low battery in one or more connected lights
- Includes CR1632 battery, handlebar mount, and quick-start manual
- Battery: CR1632 (Coin)
- Weight: 12g

$149.99
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.

$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

$14.95
2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.
$14.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light!
System Compatibility
- Lumina Series
- MiNewt Mini Series
- Mako Series

$4.99
Put a Flare almost anywhere
- For use with all Flare tail lights
- Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
- 2g

$39.99
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.

$15.99
Where your gaze goes, your light follows
Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights.
- Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash

$14.99
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.

$12.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
- Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

$39.99
$69.99
43% Off
Welcome to the future
The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights.
The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more.
- Transmitr remote can simultaneously control up to 7 lights
- ANT+ enabled for use with all Transmitr products
- Use Transmitr system for wireless on/off, mode selection, and more
- Can be used with multiple Flare RT lights for turn signal configuration
- Includes CR2032 battery, mount, and quick-start manual

$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks

$29.99
Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module.
- Compatible with Nip e-Bike Headlights

$13.99
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

$9.99
This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

$9.99
Key features:
- Securely attaches all Ion lights to bars
- Reduces vibration and slippage
- Compatible with 22.2-31.8mm diameter bars
- Mount rotates left and right for optimal placement

$39.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices.
- Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount
- Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series
- Material: aluminum / fiberglass composite
- Max load: 220g
- Weight: 40g (120mm) / 45g (150mm)
- Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

$8.49
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

$9.99
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light
- Designed specifically for aero seat posts
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal

$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura.
- Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.)
- Lightweight and rustproof alloy construction
- New LW-Clamp reduces weight 25 grams compared to previous models
- Aluminum bar is position adjustable and uses Hex Bolt to install and remove
- 27mm-35mm diameter

$9.99
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

$2.99
Key features
- Reflector mount for first and second generation Speed Concept seatposts
- To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)

$29.99
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar.
- Compatible with Nip e-Bike headlights
Page 1 of 3
Next page