Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$64.00
Essential parts to properly service and maintain all Avid CODE brakes.
- Replacement parts for 2007-2010 CODE brakes
- Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$95.00
SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, and Bleeding Edge Fitting.
- For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes
- Improved sealing and durability
- New rotating metal hose fittings
- High volume hose with clamp
- Longer lasting
- Must-have for all mechanics
- NOT compatible with RockShox fork bleed kit
- Brake fluid sold separately
$12.99
Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place.
Features:
- New and Improved
- 20mm of Adjustment
- Single Axle Position
- Slotted for Dropout
- ED Black Hardware
- Anodized Finish
Specs:
- Axle Size 10mm (3/8") only
- Material 6061-T6 Aluminum
- Hardware
- Stainless Steel
$13.99
- Freewheel remover for use with single speed 4-key freewheels
- Can be used with a 24mm wrench
- Compatibility: 4-Key
$27.99
- For use on 8-key single speed freewheels
- Tool Type: Freewheel Remover
- Compatibility: 16-22T smallest cog (Gray)
- Compatibility: 13-14T smallest cog (Silver)
$14.99
Everything you need
Be prepared for roadside adjustments and minor repairs with the Bontrager Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly.
Key features
- 2,2.5,3,4,5,6,and 8 hex along with Phillips, flat and T25
- Alloy sides for a sleek lightweight design
- Material: Steel
$24.99 - $26.99
High-performance bicycles require precision during setup and adjustment. The Preset Torque Wrench provides secure adjustments while preventing damage to lightweight bars and forks from over-tightening.
Product details
- Tools are pre-set to 5Nm or 6.8Nm
- Check component tightening specifications before using
- 4mm and T25 keys are non-removable
$34.99
A compact multi-tool that is designed for integrated storage in compatible Trek road frames.
Compact and easily stowed
The BITS Integrated Multi-Tool is a compact multi-tool that is designed for clean, integrated storage into compatible Trek road bike frames. The small but smart design features hex tools from 2-8mm along with a T25 Torx, and flathead screwdriver. The ergonomic design makes the tool as easy to use as it is to carry.
Product details
- Designed for secure integrated storage in the new Domane with storage door
- CNC-machined keys for lightweight durability
- 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver
- Slim profile makes it easy to pack on any ride
- Ultralight aluminum alloy design
$54.99
A convenient all-in-one pack containing useful tire-change essentials.
Flats happen. Make sure you're prepared with a Bontrager Flat Pack. Featuring the storage, inflation, and tire removal equipment you need to handle an emergency flat repair, this purchase also includes a coupon for a free Bontrager tube so you can get the right size for your bike and tires.
Product details
- Kit features everything you need to quickly fix a flat, including the seat pack
- Includes Pro Small seat pack (non-QC) for quick and easy on-bike storage
- Contents include: mini pump, three tire levers, and patch kit
- Also includes coupon for a FREE Standard Bontrager Presta or Schrader inner tube
$105.00
Product details
- A professional-grade tool developed in partnership with Knipex and made to last
- 7.5"/190mm length provides high leverage with minimum effort
- Made from heavy-duty steel and additional induction hardening for tough, continuous use
- Made in Germany
- Features an integrated class-leading crimper for cable end caps and housing ferrules
$41.45
Contains the fittings and syringes needed for bleeding Campagnolo disc brakes
-Does not include mineral oil
- Fits Brand: Campagnolo
- Hydraulic Fluid Type: Mineral Oil
$214.00
Campagnolo UT-CN400 Chain Tool.
- Used to install 12-speed and 13-speed Campagnolo chains
$272.00
- 11 speed compatible
- Allows removal, installation and peening of rivets
$49.99
- Cable Tie Gun quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts, and abrasions to cables
- Automatically cuts off excess strap when the selected tension setting is achieved and saves installation time with one easy pull of the trigger
$14.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes:
Hex wrenches: #3, 4, 5, 6
Screwdrivers: Phillips #2
Length: 89mm
Weight: 85g
Warranty: Lifetime
$19.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m10 includes:
Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
Screwdrivers: Phillips #2, flat #2
Torx: t-25
Length: 89 mm
Weight: 124g
Warranty: Lifetime
$36.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m19 includes:
- Chain tool: 8/9/10 speed compatible
- Spoke wrench: #0, 1, 2, 3
- Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Open wrench: 8mm, 10mm
- Screwdrivers: Phillips #1, Phillips #2, flat #2
- Torx: t-10, t-25
- Stainless steel carrying case
- Length: 89 mm
- Weight: 175g
- Warranty: lifetime
$49.99
Thin, light and minimalist design.
- 5-year warranty
- Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
- Screwdrivers : Phillips #2, flat #2
- Torx : t-25
- 8-12 speed chain tool is incorporated into the case
- Spoke wrench : #0, 1, 2 & 3
- Magnetized storage case can be used as a handle for extra leverage
$16.00
- Professional wrenches fit internal nipples on many deep section aero rims
$20.40
- Slotted construction for securing Aerolite bladed spokes
- Helps prevent spoke twisting while wheel building/truing
- Red handle for 0.8-1.0mm spokes
- Black handle for 1.0-1.3mm spokes
$20.40
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- Multi-tool for DT aero spokes, torx, and square nipples
$34.00
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- Works with Torx-style nipples found on DT Swiss Tricon Wheels
- This professional tool is designed for a precise fit and prevents rounding of nipples
- Metal nipple interface contacts torx nipple on all surfaces
$34.00
DT Swiss spoke wrenches for repairing all types of DT Swiss wheels.
- This professional tool is designed for precise fit and prevents rounding of nipples
- Metal nipple interface contacts nipple on all four surfaces
- Fits 3.25mm square nipple interface
$109.10
Developed for locking the nipple to the spoke during the wheel-building process, preventing the spoke-nipple connection from loosening.
- Holds nipples in place but allows for up to 5 adjustments before compound breaks down
- Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond
- Developed in conjunction with Loctite
- Includes two 10ml bottles
$7.00
- Gel contains non-Abrasive plastic beads that provide increased surface friction
- Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc)
- Prevents corrosion/scuffing and quiets creaking noises
- Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired
- Always follow the manufacturer's torque specifications when clamping carbon parts
$28.00
- Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane creek, TH/FSA)
- Includes inside gauges for headtubes and cups and outside gauges for bearings
$29.99
- Fits over ISIS spindle end, extra deep for longer spindles
- Compatible with internally splined bottom bracket cups (i.e. all Race Face ISIS, all FSA ISIS, most Shimano)
$34.99
- Star nut threads onto driver.
- Driver slides up into guide tube
- Guide tube fits over outside of 1-1/8" steerer
- Hammer on round end of driver until steerer contacts driver-stop
- Star nut is properly aligned and seated a consistent depth
Page 1 of 25
Next page