Tires

Kiss pinch flats goodbye with Bontrager's tubeless-ready CX3. Run lower pressures and get traction performance that goes head to head with tubular tires for a fraction of the cost. • A great-cornering TLR cyclocross tire built for muddy and soft conditions • Excels in muddy and soft conditions • TLR tire engineered for use with TLR sealant (sold separately) for worry-free setup and puncture protection

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, robust 60TPI construction, the 2x60TPI casing combines no-compromise durability, while retaining traction and support over the most rugged terrain. Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection DH:Wall – A butyl layer located within the casing ply, providing our highest level of sidewall defence.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- Comfortable ride - Classic colors

For the hybrid, 29er, or cyclocross rider seeking an economical, mixed-use tire that delivers off-road prowess with on-road manners, look no further than Bontrager's Connection tire. Aggressive knobbies grip the loose stuff while a connected center ridge rolls smoothly.

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 12 1/2 x 2 1/4

- Gray tread, sidewalls with raised center - 8 x 1 1/4

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 12 1/2 x 2 1/4

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

Bontrager's Dialed Kids Tire is a great choice when you need a sturdy, easy rolling replacement tire for your young rider's bike. It's perfect for pavement and bike paths. - 27 TPI - Wire bead - Clincher

Bontrager's Dialed Kids Tire is a great choice when you need a sturdy, easy rolling replacement tire for your young rider's bike. It's perfect for pavement and bike paths. - Excels on sidewalks and streets - Easy-rolling tread keeps kids riding smoothly - 27 TPI - Wire bead - Clincher - Max pressure: 50psi - ETRTO: 44-305 - Weight: 360g

Bontrager's Dialed Kids Tire is a great choice when you need a sturdy, easy rolling replacement tire for your young rider's bike. It's perfect for pavement and bike paths. - Excels on sidewalks and streets - Easy-rolling tread keeps kids riding smoothly - 27 TPI - Wire bead - Clincher - Max pressure: 50psi - ETRTO: 47-406 - Weight: 505g

- Hybrid tire for street or light trail use - Wire bead - Size: 26 x 1 3/8 (ISO 590mm)

- Entry-level BMX-style tire with sturdy casing for longevity

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 14 x 2.125

- Recreational tire with raised center for low rolling resistance - Fits Schwinn "lightweights" and older British club bikes - Size: 26 x 1 3/8

- Recreational tire with raised center, slight lateral grooves for traction - Size: 24 x 1 3/8

- Recreational tire with horizontal grooves for traction - Size: 26 x 1 3/8 - ISO 597

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 16 x 1.75

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 406 - Bead: Wire - PSI: 65

Park/street tire, with directionally grooved tacky tread. - ISO: 305 - Bead: Wire

Park/street tire, with directionally grooved tacky tread. - ISO: 355 - Bead: Wire

- Gray tread, sidewalls with raised center and lateral knobs - 24 x 1-1/4 (ISO 547) - 24 x 1-3/8 (ISO 540)

- Gray tread, sidewalls with raised center and lateral knobs - 26 x 1 3/8 (ISO 590)

- Street/park tire with near rim-to-rim tread, tacky surface, medium grooved - Wire bead - Size: 12 1/2 x 2 1/4

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 406 - Bead: Wire - PSI: 65

- Entry-level BMX/MTB tire with deep knob pattern for traction - Wire bead - 16 x 2.125

- Knurled low rise tread designed for less rolling resistance - Lightweight casing with a folding bead - Expanded tread area to increase cornering traction