All Bike Accessories

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problems. The DAG-3 features an all-new design, engineered and built to be light, accurate, and versatile. The sliding indicator can measure derailleur hanger alignment against bicycle rims of any size and rotates out of the way to clear seat stays, racks, and other obstacles, allowing 360-degree measurement. The long, precision-extruded aluminum body is built to exacting tolerances and provides ample leverage for making adjustments. - Compatible with 16" to 29"+ wheels (ISO/ETRTO rim sizes from 317 to 630+) - Replaceable M10 threaded tip - Low-profile head fits low clearance thru-axle derailleur hangers and Shimano Direct Mount hangers - Length: 16.5" (420mm) - Weight: 22.75 oz. (645g)

- Bearing extractor set for small bearings - (1) 608, (1) 609, (1) 6000, (1) 6001

The MET Estro MIPS is a versatile road helmet ready for your longest day on the bike. As comfortable as a top-of-the-line helmet, its design is widely open to maximize ventilation at low speeds. With 26 vents, 17 of which are inlets and 9 are exhaust holes, all of them work in synergy with the internally engineered air channeling system to ensure maximum ventilation. The Estro MIPS is also exceptionally comfortable. The 360° head belt in the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull, and its internal shape is welcoming for almost all different shaped heads. Featuring the MIPS-C2 brain protection system, the MET Estro MIPS is able to slide against the head in the event of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The front of the helmet features two dedicated ports for securely docking sunglasses while resting or climbing. The design reflects the purpose - to adapt to various uses and environments. Widely open, deeper coverage, a versatile visor, and a full polycarbonate wrap that makes it more durable by avoiding exposure of EPS surfaces to outdoor conditions. - In-mold polycarbonate shell with EPS liner - Full polycarbonate wrapped EPS liner to enhance durability - Extended head coverage for more thorough skull protection - MIPS-C2 Brain Protection System add protection in case of certain impacts - MET Safe-T Upsilon Fit System - 360° head belt and vertical adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamics and comfort - Sunglass ports to securely dock sunglasses - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Comfort pads are hand-washable - Certifications CE; AS/NZS; US

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of either 15 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

BORDO™ 6000C LED THE CLASSIC BORDO WITH OPENING CODE AND LIGHT Never be left in the dark again. The BORDO™ 6000C LED can be used to illuminate the combination set window. This way, you can unlock the bike lock at night if there is limited light. The BORDO™ 6000 has become a real classic over the years - the clever design has won friends all over the world with its high level of security, flexibility and compact size. The 5 mm bars connected with specially designed drill resistant rivets can be folded for easy transport. The BORDO™ 6000C LED adds another member to the BORDO™ 6000 family. The C in the product name indicates that this is a combo lock with code. The integrated LED light gives you enough light to see the set numbers even in the darkest locations. Is there need to worry that the numbers might wear off or fade over time? Not at all - the numbers are not printed. Instead, we produce the code dials from two durable components that guarantee long-term readability. - 5 mm thick bars, extra-soft coating to prevent damage to paintwork - The bars and the housing are made of specially hardened steel - Bars are connected by special rivets - Integrated LED lamp for illuminating the code dials - A CR1220 button battery to power the LED lamp is included - Two-component code dials ensures long-lasting legibility - Opening code can be set individually

The Bosch Purion is a minimalist on-board computer designed for anyone who wishes to focus on the most important information and prefers an uncluttered handlebar. The Purion displays the essentials and lets riders get all important information with a click of the thumb, while keeping hands on the handlebars. Five different riding modes provide just the right amount of assistance in every situation. - Manages four levels of assist from Eco to Turbo, with an eMTB mode specially designed for the Performance Line CX Drive system - Features include charging status, speed, riding mode, range, trip distance and total distance

For easy and safe servicing of your RockShox rear shock, look no further than the RockShox Rear Shock Clamp Tool. Use with model-specific clamp tips for servicing the damper of your rear shock. - For rear shock damper servicing - Ratcheting pistol grip action for easy operation - Use with shock-specific clamp tips

FOR DEMANDING TRAILS The CliffHanger is the flagship trail model in the ABUS MTB series. When you're riding up and down steep hills on an enduro bike, the MTB helmet offers reliable protection. Lighter, better ventilated and with an adjustable TriVider webbing spreader—the CliffHanger scores with these features. The special MTB adjustment system also ensures that the helmet sits comfortably and firmly on the head when rattling through the wildest of rock gardens. The inner shell made of EPS hard foam is foamed into a three-part outer shell, making a lightweight and sturdy helmet. The existing Multi-directional Impact Protection System (MIPS) can reduce energy by up to 40 percent in the event of an oblique impact. With the CliffHanger, we have succeeded in developing a helmet that offers virtually perfect conditions for high speeds and demanding trails. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - ActiCage: Structural reinforcement integrated in the EPS to optimise stability - Moulded lower shell for added durability - Height-adjustable visor - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 8 air inlets and 6 air outlets - FidLock magnetic buckle

With an extra battery on board, you have the flexibility to extend your ride. The FAZUA Battery Bag was developed in cooperation with the experts from evoc for carrying the FAZUA 250 and 250x battery. It attaches to the frame with a few simple straps. The three fixation points hold it tightly to the frame preventing sway and bouncing. - Carries all available batteries of the FAZUA Ride 50 Evation product family and additional gear - Hypalon reinforcement material protects the frame and internal padding protects the battery - Two straps with buckles and a 3rd with hook and loop fastener securely hold the back to the frame - Highly abrasion-resistant and water repellent material with roll closure keeps the battery secure - Welded seams and water-repellent tape construction Specifications: - Number of Compartments: 1 - Top Tube Length: 12.2-inches - Seat Tube Length: 3.2-inches - Width: 3.2-inches - Volume (In3): 79 - Volume (L): 1.3 - Total Volume: 80 - Primary Material: 10% Polyester/ 70% TPU/ 20% Nylon - Weight: 140 - Waterproof: No

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Designed with the speed of pro riders in mind, the Bluegrass Rogue Core MIPS is sharp, bold, and alternative. It's designed to properly protect the most sensitive head areas, the back, and the temples. - The Rogue Core Mips exceeds worldwide certifications and performs best at both linear and rotational impact thanks to its meticulously engineered EPS shell and the MIPS-C2® brain protection system attached inside the helmet - The visor is designed to enhance safety and protect from branches - In the event of a crash, the visor will adapt to the shell of the helmet to help withstand extra rotational forces transferred to the neck - The Safe-T Heta retention system provides an exceptional fit and keeps the helmet stable on the head - The 360° head belt ensures that there are no pressure points on the skull, while vertical adjustments provide a custom fit - The edge at the back of the helmet is designed to properly keep the goggle strap in place - Sunglasses can be securely docked into the two visor vents - The straps anchors are embedded into the EPS and you can quickly fasten them thanks to the Fidlock® magnetic buckle, even while wearing gloves

SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Opening measures 9" across

The Pedelec 2.0 offers an uncompromising combination of comfort and protection. Complemented by clever features, it is the ideal companion when cycling in road traffic. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Forced Air Cooling Technology ventilation system keeps you cool and comfortable with 4 air inlets and 9 air outlets connected with flow channels - Zoom Ace Urban adjustment system with handy adjustment wheel for a customizable fit - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - High visibility due to powerful reflectors and an integrated LED taillight with 180-degree visibility - Foamed-in fly nets keep insects out - Lower edge protection provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Ponytail-compatible and well suited for braided hairstyles Sizing: - Medium: 52 – 57cm - Large: 56 – 62cm

The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs. - Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories. - MHS Hitch Base fits 2" receivers - Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately - Convenient rear of vehicle access with tilting base activated with easy to use outboard handle - Compact storage on vehicle as base tilts up when not in use - Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection. - Includes hitch lock plus additional 3 lock cores for use with MHS Accessories - Fully assembled and easy to install on vehicle

The W-3100 with tool tray set is a great stand for either the shop or the home mechanic. Sturdy base allows for industrial use. - Heavy-duty steel maintenance stand for home mechanics with single lever clamping operation that can hold 65 mm tubing - Legs are foldable for storing in narrow space and 360° rotatable to keep the bike at best angle - Widely spanned legs for great stability - Clamp height is fixed at 55.5 inches from floor - Clamp jaw can be rotated to hold the bike in the best position

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

So, you have disc brakes, and only the best is good enough for you. Now, you can mount a Tubus carrier on your bike. Their Disco is designed to be combined with disc brakes. Instead of using added accessories, the Disco simply fits onto your frame. The carrier is easy to mount using the included quick release, or it can also be mounted on eyelets of the frame. Simply load up your bike and go. - Includes QR Skewer

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks HYUNDAI - Elantra GT 5-dr Hatchback with Normal Roof 2018 - 2019 - Elantra GT 5-dr Hatchback with Glass Roof 2018 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Tucson 5-dr SUV with Normal Roof 2010 - 2015

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FIAT - 500L 5-dr Hatchback with Normal Roof 2013 - 2019