Parts & Accessories

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Stay ahead of the pack with Garmin's Extended Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

Replacement chainstay cover for DuoTrap S Digital Sensor

- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long

STAY AWARE OF APPROACHING CARS This rearview radar pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind. - Reliable rearview radar lets you ride like you know what’s coming. - One radar. Multiple display options. Pair it with your compatible Garmin device, your phone or both. - Don’t have an Edge or other compatible device yet? No problem. The Varia app has you covered. - It’s small, it’s easy to mount, and it works with just about any bike. - Get more life out of your radar with up to 7 hours of battery life. MAXIMUM AWARENESS - Varia RVR315 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — to indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 7 hours of battery life. In the box: - RVR315 - Mounting hardware - Power cable - Documentation

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord

Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible. • Mount your hard-shell smart phone case to your bike • Allows for easy access of phone on stem or handlebar • Includes Insta-Mount, universal mount, and application grid • Blendr-compatible

Replacement chainstay cover for DuoTrap S Digital Sensor

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Our patent-pending integrated mount for the ELEMNT ROAM GPS bike computer is made of durable, lightweight plastic. It also comes with an optional locking screw that is UCI-compliant for connecting your ELEMENT ROAM to your bike for weigh-ins. - Fits 31.8mm round bars - Weight: 1.55 oz (44g) - Works exclusively with ELEMNT ROAM

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash

Pro Blendr is the ultimate computer integration system for clean and easy installation directly to Knock Block. - Start with a Knock Block equipped frame using the appropriate frame chip with display tabs, and finish with Pro Blendr Knock Block Computer Mount for secure mounting of computers behind the stem to keep your cockpit spotless. - In addition to the correct frame chip with display tabs, don't forget your Garmin or Wahoo Adapter Puck! These are sold separately so you can build the ultimate Blendr system that's right for you.

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Pro Blendr is the ultimate computer integration system for clean and easy installation, made from durable alloy. - Blendr is an elegant, integrated accessory mounting solution - Alloy design provides clean and secure mounting of computers - Adapter pucks available for Wahoo and Garmin computers (sold separately) - Compatible with all Blendr bases - Attach your Garmin tether for an additional layer of security

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence, and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6mph

See and be seen with original equipment lighting accessories. Ensure your lights are always ready to go when you are with this fast-charge USB cable. PRODUCT DETAILS - USB-to-USB-C cable to recharge your Bontrager lights - Compatible with most other USB-C devices - Quick charge - 230mm long

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle

Connect your PC to CycleOps VirtualTraining.

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Blendr add-on to Kovee Pro 35 stems Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases. - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Kovee Pro 35mm stem - Add any accessory mount (sold separately) for an elegant, integrated look

Mounting for Shimano Di2

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

With an extra battery on board, you have the flexibility to extend your ride. The FAZUA Battery Bag was developed in cooperation with the experts from evoc for carrying the FAZUA 250 and 250x battery. It attaches to the frame with a few simple straps. The three fixation points hold it tightly to the frame preventing sway and bouncing. - Carries all available batteries of the FAZUA Ride 50 Evation product family and additional gear - Hypalon reinforcement material protects the frame and internal padding protects the battery - Two straps with buckles and a 3rd with hook and loop fastener securely hold the back to the frame - Highly abrasion-resistant and water repellent material with roll closure keeps the battery secure - Welded seams and water-repellent tape construction Specifications: - Number of Compartments: 1 - Top Tube Length: 12.2-inches - Seat Tube Length: 3.2-inches - Width: 3.2-inches - Volume (In3): 79 - Volume (L): 1.3 - Total Volume: 80 - Primary Material: 10% Polyester/ 70% TPU/ 20% Nylon - Weight: 140 - Waterproof: No