Tools

Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve

The RT-2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. • Designed for the 1-1/4 inch and 1-1/2 inch headest standards • Also easily removes cups on one-piece cranks • Strong, heat-treated alloy steel with a nickel finish SHIS Terminology: The RT-2 will remove cups of ZS44, ZS49, ZS55, ZS56, EC49 and EC56 headsets.

The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. It's useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. - Straps install onto any round tube from 12mm to 60mm (0.5" to 2.4"), as well as most irregular and aero-shaped tubing found on bicycles - Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions - Usable extension length of 18" to 32" (45cm to 81cm) - Collapses and folds to 17" (43cm) for storage

SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

- Bearing extractor set for small bearings - (1) 608, (1) 609, (1) 6000, (1) 6001

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. - Hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Partially Lasertip: the tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head - "Take-it-easy" Tool Finder: color coding according to profile and size. - The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace - Includes practical rack for tidy storage of the screwdrivers - Screwdriver for slotted and cross-recess screws, Phillips - Multi-component Kraftform handle for fast and ergonomic screwdriving

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

- Perfect companion for your Pedro's torque wrench - Bits made from premium S2 tool steel to ensure strength and lasting performance - Includes 16 hex and torx bits and 2 drive adapters in convenient holders - 50mm length bits in key sizes ensure component compatibility Pedro's Hex Bit Set II is designed to work with our torque wrenches offering an extensive range to handle most hex and torx needs. The set includes longer 50mm bits in key sizes to ensure compatibility and fit with all components where standard 25mm bits fall short. Bits are made from premium S2 tool steel for strength and lasting performance. Set includes: - Hex: 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm) - Drive Adapters: 1/4-inch square to 1/4-inch hex & 1/4-inch hex to 1/4-inch square

- 120 gram, 7-function shop quality folding tool with 2.5, 3, 4, 5 and 6mm hex wrenches and flat-blade and #2 Phillips screwdrivers. - Super strong composite body features new design with improved comfort, increased leverage, and stay-tight bolt design. - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance. Pedro's folding wrench sets are essential for the shop, event, ride, and at home. These folding wrench sets feature professional grade tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, and body made of lightweight but super tough composite material. The new body features improved ergonomics, shaped to perfectly fit in your hand, allow easy access to each tool, and with extra length for better leverage and control. In addition, the new stay-tight bolt design keeps tool bits from loosening over time. Backed by Pedro's lifetime warranty.

- For use on 8-key single speed freewheels - Tool Type: Freewheel Remover - Compatibility: 16-22T smallest cog (Gray) - Compatibility: 13-14T smallest cog (Silver)

Includes two rotating brushes, two sponges and two wicking pads already installed in a composite cartridge, ready to snap into the CM-25 Professional Chain Scrubber (sold separately.

These premium needle nose pliers feature a compact 6" (150mm) length, forged and heat-treated steel construction, and ergonomic dual-density grips. The self-opening jaws provide a full-featured profile, ready for gripping, crimping, and cutting tasks. - Compact 6" (150mm) length and self-opening jaw - Forged and heat-treated steel constuction - Ergonomic dual-density grips

Replacement adapters for Jagwire Elite Bleed Kits - Features quarter-turn valves that make it easy to quickly open and close the bleed system - Red seals provide easy identification for use with mineral oil systems only

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

The DC-2 is a vernier caliper for accurately measuring seat posts, head tubes, bearings, spoke diameters, and other components, featuring a large LCD screen for accuracy and ease of use. The tool’s ability to measure in metric and inches in external, internal, depth, and stepped dimensions make it an indispensable shop tool. - Range: 150 mm | 6" - Resolution: 0.01 mm | 0.0005" - Accuracy: +/- 0.02 mm | 0.001" - Repeatability: +/- 0.01 mm | 0.0005" - Measures external, internal, depth, and stepped dimensions - Uses LR44 batteries

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams

There are few things as good as a peanut butter and jelly sandwich, and Origin-8's PB & J Fixie Tool is one of them. Its crafted from heat-treated chromoly steel and features a 15mm axle nut socket, lockring removal tool and a tire lever. It also has a handy bottle opener and includes two wing nuts for frame mounting.

- Kit includes full-fluid capture bottle, bleed fittings, hose, syringe and 16oz Magura fluid

For easy and safe servicing of your RockShox rear shock, look no further than the RockShox Rear Shock Clamp Tool. Use with model-specific clamp tips for servicing the damper of your rear shock. - For rear shock damper servicing - Ratcheting pistol grip action for easy operation - Use with shock-specific clamp tips

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

Oil Level Adjuster (for checking and adjusting oil level) -Reverb/Motion Control Dampers /Turnkey Dampers

Jagwire's Disc Brake Multi Tool includes 4 important and frequently used disc brake tools so you have what you need to keep your brakes working great. You get a pad spacer, bleed block, rotor truer (straightener) and piston press.

- Pad/rotor alignment tool, helps set up pad gap on all Hayes brakes

Precision Bit Driver With Hex & Torx Bits - Ergonomic machined aluminum body with bearing-mounted rotating cap for precision and control. - Magnetic bit drive accepts any standard 1/4" hex bit. - Internal storage for two bits. Compatible with Multi-Torque Bit Set. - Includes 2 & 2.5mm hex, and T25 torx bits. Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning, and easily adapts to different tasks. Features precision S2 tool steel bits, machined aluminum body, ¼" magnetic hex bit drive, and bearing-mounted rotating end cap. Add the compatible Multi-Torque Bit Set to store eight additional bits on board.

Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.

The TL-6.3 is a set of tire levers designed to provide all the advantages of both steel and composite tire levers. The steel core with protruding tip offers the strength and leverage needed to securely engage stubborn tire beads, while the durable composite coating makes for smooth operation and will not mar sensitive rim surfaces. With its ergonomic shape and ideal size, the TL-6.3 is perfect for use as an everyday shop lever or can be stored in a saddlebag or tool roll for the mobile mechanic. - Redesigned to be stronger and 0.75" (18 mm) longer than their successor, TL-6.2. - Set of two - Dimensions (each): 145 mm x 25 mm x 6 mm (5.75" x 1" x 0.24") - Weight (each): 46 grams (1.6 ounces) - TL-6.3 levers have been redesigned to be stronger and 0.75" (18 mm) longer than their successor, for increased leverage

Adjusting chain tension is quick and easy with the new Box Three™ Chain Tensioner. With a single-hole "lollipop" design, these tensioners reduce weight and help keep your rear wheel locked in place. Features: - New and Improved - 20mm of Adjustment - Single Axle Position - Slotted for Dropout - ED Black Hardware - Anodized Finish Specs: - Axle Size 10mm (3/8") only - Material 6061-T6 Aluminum - Hardware - Stainless Steel

- 200 HOUR/1 YEAR SERVICE KIT (INCLUDES DUST SEALS, FOAM RINGS, O-RING SEALS, CHGR2 DAMPER SEALHEAD, DEBONAIR (SILVER) SEALHEAD—ZEB SELECT+/ULTIMATE A1 (2021)