All Bike Components

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts

Low And Lean Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on. Round And Round We Go Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable. Ride Don't Slide Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck. Look Good Ride Good Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like. Pedal Envy More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods. Specs: - Axle Material: Chromoly Steel - Body Material: 6061 Aluminum - Material: 6061 Aluminum - Platform Height (MM):14.5 - # of Pins: 20 SHCS hex traction pins per pedal (10 per side) - Platform L x W (MM): 114 x 101 - Weight: 355g

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Gravel road riding is all the rage at the moment. It's great for cyclists who want to leave sealed roads behind and enjoy the freedom of cycling on unpaved roads. Designed to suit diverse touring styles, the GravelKing uses a mixture of properties that also accommodate on-road cycling. Featuring ZSG Natural compound, anti-flat Casing, and Advanced Extra Alpha Cord. - Black multi-use gravel tread - Aramid (Kevlar) folding bead

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

We named this tire for our friend Nate, who is also quite large and aggressive. This tire has a shred-your-face-off, run-over-anything, kung fu grip knobby tread pattern. The casing is round and supple. Tall, widely-spaced knobs are siped for added grip and compliance. The knobs’ wide spacing means they dig deep and still shed the crap you’re riding through. The tread wraps a little around the sides of the tire, providing good knob contour even on very wide rims, which in turn allows good off-camber traction. Similar to our beer preferences, Nate is available in black and tan. - Folding bead - Max pressure: 30psi

Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.

This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky

- Pedal body made of ruggedly durable engineering-grade thermoplastic - LSL sleeve bushing and sealed bearing - 9/16" CNC machined Chromoly spindle - 10 M3-8mm replaceable pins per side - Platform size: 113mm x 105mm - 350g per pair

For outstanding comfort, Planet Bike's Comfort Gel Saddle has a sleek shape that provides excellent support, a center recess that eliminates pressure points and Planet Bike's SuperSoft padding. This sweet seat also sports gel for cushioning and miles of smiles.

SRAM's PowerGlide PG-820 Cassette is a fine 8-speed cassette. It features steel cogs with SRAM's DuraBlast technology for smooth, precision shifting and excellent durability.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs

The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday. - Length: 135mm - Lock On: Yes - Weight: 105g

Enjoy the velvety smooth ride and sure grip of Electra's quick-rolling Townie Tire. Plus, its classic design adds a touch of style to any bike.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Comfort and Confidence The inForm BioDynamic design of the Satellite city pedal delivers ultimate pedaling comfort. The wide, stable platform is designed to support your foot while you're pedaling, and the grippy texture provides confident traction to keep you going. Reflector wrap on each pedal ensures all-around visibility. - Large, concave platform for support and stability - Anti-slip texture for traction and confidence - 270-degree reflectivity for all-around visibility - inForm BioDynamic design for comfort and support while pedaling - Spindle: 9/16-inch

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Fitness-focused Posture 4 saddle with comfort of a cut-out design. Fitness focused, and designed for comfort The Sport saddle brings performance, support, and comfort to the posture 4 fitness rider. A full cutout design eliminates soft tissue pressure and the saddle's soft padding ensure an ultra-comfortable ride for the cyclist seeking performance in an upright seated position. Product details - Fitness Posture 4 features an upright pelvic rotation to go farther, faster - Contour Relief Zone Plus (CRZ+) full saddle cut-away enhances soft tissue protection - Tough, weather-resistant cover repels water - Sleek, supportive padding provides comfort while maintaining performance Specifications - Size: 275mm x 163mm - Length: 275mm - Width: 163mm - Rail dimensions: Round 7x7mm (Standard) - Cover material: Microfiber - Rail material: Steel - Weight: 350g

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a SRAM or Shimano front derailleur. These shifters are indexed to shift three gears, and feature micro-adjustments for perfect front derailleur alignment.

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.

The Rock Hawk is designed as an all-condition trail tire that has an aggressive tread with widely spaced lugs. - Ramped center knobs reduce rolling resistance - Durable 27 TPI casing

Choose from the many colors and add style to your ride with Origin-8's Compe-Lite Seat Post. It's crafted from light and durable 6000 aluminum, and features a single-bolt adjustable clamp for easy seat installation and fine-tuning.

Tightly spaced knobs for dirt use - Bidirectional - Engineered for BMX tracks, trail riding, and dirt jumping - Front or rear - Full Square-knob design Staggered, tightly spaced center lugs provide control at speed. The knob spacing increases near the shoulder lugs to produce two channels that hook up on both hardpack berms and loose dirt on the trails.

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

Long hours in the saddle? No problem with the SM Comp Men. This male-specific all-around MTB saddle is great for touring, trail and all-mountain riding. It offers the highest level of comfort through the anatomically optimized relief channel and orthopedic comfort padding. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel. The flattened rear and the Y-shape guarantee full freedom of movement when in the typical MTB riding position. Sliding flanks help reduce friction when pedaling.

Bar end plugs (2)

- 100% SDG DNA in the design of these pedals - Utilizes a flat profile which allows optimal grip for flat pedal shoes - Composite body design - Minimal 17mm pedal body height maximizes the pedal feel - 105mm x 110mm Platform - Ramped and undercut traction pad - 18 pins, replaceable, bottom loaded - Bearing/bushing design for maximum durability. Fully rebuildable pedal design - Cro-Mo axle

- For a safer journey. You have full control on icy roads with the Marathon Winter Plus. - For best possible puncture protection, it comes with a SmartGuard layer. - Spikes work best on ice at the minimum pressure - At max pressure, noise is reduced to a minimum on ice-free roads.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Three decades ago, SRAM was founded on a product called Grip Shift and an idea that shifting a bike should be easier, better and more intuitive. It’s more advanced than the original, but the XX1 Eagle Grip Shift follows in the same tradition of making shifting easier, better and more intuitive. The XX1 Eagle Grip Shift system includes robust internals that make it more durable and its shifting performance more precise. But just like the original, it is total control in the palm of your hand.

Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Cruise in style with Schwalbe's Big Apple Performance tire. Their wide Balloonbike profile provides natural cushy suspension, and it rolls easily thanks to the smooth tread. Plus, you get their RaceGuard puncture protection and lightweight Endurance rubber compound for confident handling.

ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

• Includes a plastic storage box, 6 patches, cement, and scuffer

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

- The Cinturato Velo is designed around reliability in bad road conditions and heavy usage as priority and it still keeps Pirelli DNA thanks to its SmartNET Silica compound and confidence-inspiring handling. - Its patent pending Armour Tech construction combines a bead-to-bead high density layer to an aramid breaker and aramid fibers dispersed into the tread. - The SmartNET Silica compound coupled with Pirelli long experience in tread design, adds the safety and handling in any condition, whether it is wet or dry, Pirelli is already famous for.

- Unsurpassed all-weather traction. - Modeled after our Assurance All-Season automobile tire, the Transit Tour combines a durable, utilitarian construction with directional siped tread that offers unsurpassed all-weather traction. - Constructed to eBike approved standards and with reflective side strips enhancing twilight and night visibility, the Transit Tour provides robust flat protection along with a comfortable ride for your next journey.

The pinnacle of cross-country cycling performance can be found in the SRAM XX SL T-Type Eagle AXS™ Transmission Power Meter Groupset. Built to serve the most demanding rider’s needs in the lightest weight configuration, XX SL Transmission is the evolution of SRAM's World Champion, World Cup winning XX Eagle AXS™. - AXS™ Pod ULT features a “click and fire” two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS™ controls - Engineered as integrated, interdependent transmission components, the XX SL Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface - XX SL T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS™ derailleur - To further its performance, the lower pulley called, "Magic Wheel", keeps spinning if an object becomes lodged - Derailleur features an overload clutch that accommodates common maintenance - Ultra-lightweight XX SL T-Type 10-52t cassette offers game-changing inboard and outboard shifting performance under load - XX SL Eagle AXS™ T-Type Power Meter crankset boasts SRAMs XX SL carbon crankarm with an integrated power meter to record and deliver live, accurate power readings to your head unit - Power Meter spider-based design is highly accurate, high performing and boasts a long battery life

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

- Compatible with 6 and 7-speed SIS Index Shifting drivetrains - Includes BMX/track frame hanger

Put your hands on Cane Creek's SCR-5 Brake Levers. With comfortable hoods and lightweight aluminum levers, the SCR-5s are the perfect choice for your non-geared bike. There's a brake release button on the lever which facilitates easier wheel changes.

Shimano's Claris Dual Control Levers offer smooth shifting and confident braking. The hoods are ergonomically contoured for a comfortable grip and easy access to shifting controls from any handlebar position. Top-view gear indicators ensure you know which gear you're in at all times.

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

Replacement levers for Trek kids' bikes. Genuine replacement parts Replace your worn or damaged brake levers for proper braking operation. - Sized for smaller hands - Two-finger lever operation

Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts. - No bearings, adjustable bushing tension - Two-piece plastic bodies with replaceable metal pins and CroMoly spindles

Packed with the performance you have come to expect from the Yeti name, the Hardcore grips are a great choice for riders looking for a soft compound grip with excellent control. - Large, raised Yeti logo pad cushions your palms - Smaller angled Yeti logos offer traction for your fingers - Constructed of our proptietary soft compound material for great feel - Dual-ply design for better bar adhesion and longer grip life - Includes Push-In Bar Ends

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs